|
|
|
|
|
| ROLL TO SHEET lamination machines |
|
|
■ Roll to Sheet Lamination Demo Machine Is Available Now! ■
Sun-Tec's Roll to Sheet lamination machines have been used in major consumer-electronics makers and
most-advanced displays manufactures in all over the world and we have been had high reputations.
And a Roll to Sheet lamination demo machine is available now!
Please ask us more details!
|
|
■ Machine overview ■
Laminate a sheet on glass and the sheet is feeding from roll.
Feeding film and laminating and cutting film are operated automatically. And it reduce TAKT time and cost drastically.
Application：Various kinds of optical film (OCA),AR film and AF film etc. laminate on panel.
1.Reduce Takt time and running cost drastically！
The process speed improves greatly by feeding the film and transporting
of the glass concurrently. And the running cost can be reduced by
using original rolled film compared with cut sheet.
2.Reduce particle contamination！
Particle contamination is reduced because liner is removing with laminating
so the exposure of adhesive side is very minimum.
3.Half cut and Side slitter
SUN-TEC original cutting technique achieves precise film cut. The
optional side slitter can cut the width direction of predetermined
size at the same time of the lamination process.
Our Roll to Sheet machines have been using many display production
sites in the world.
INLINE and OFFLINE both specification are available. And heat lamination specification is also available.
|
|
Specification |
| TAKT Time |
10 sec/ 40" |
| Actual
past record size |
15"
〜 60" |
| Power |
3Φ 200V 50/60Hz |
| Compressed air |
>0.5Mpa |
| Vaccum |
Factory vacuum or vacuum
pump |
| Loading/Unloading |
INLINE/OFFLINE |
|
| Copyright © 2009 SUN-TEC Corporation.All Rights Reserved. |
|
